Integrated long-term capacity expansion and operational scheduling for regional power grids: A MISO case study

Choi, C.H., Jeong, H.Y.*

Simulation-Based Hierarchical Optimization for Urban Drone Delivery in Multi-Altitude 3D Airspace

Jeong, H.Y.

Dispatch Strategy Comparison for Overhead Hoist Transport Systems: From State-Aware Dispatching to Predictive Repositioning Across Layout Scales

Jeong, H.Y.

Optimization of Urban Logistics with Multi-Modal Systems: A Comprehensive Study of the Airship-Vehicle Routing Problem

Jeong, H.Y., and Song, B.D.

Transportation Research Part E: Logistics and Transportation Review, 204, p.104415, 2025

Meta-Learning-Based Adaptive Operator Selection for Traveling Salesman Problem

Jeong, H.Y., and Song, B.D.

Applied Soft Computing, p.113930, 2025

Optimizing Urban Logistics: Vehicle Routing Problem with Underground Transportation

Jeong, H.Y., and Song, B.D.

IEEE Transactions on Intelligent Transportation Systems, 2025

Drone delivery problem with multi-flight level: Machine learning based solution approach

Kim, Y., Jeong, H.Y.*, and Lee, S.

Computers & Industrial Engineering, 197, p.110565, 2024

Numerical optimization of variable blank holder force trajectories in stamping process for multi-defect reduction

Guo, F., Jeong, H.Y., Park, D., Kim, G., Sung, B., and Kim, N.

Materials, 17(11), p.2578, 2024

Numerical multi-objective optimization of segmented and variable blank holder force trajectories in deep drawing based on DNN-GA-MCS strategy

Guo, F., Jeong, H.Y., Park, D., Sung, B., and Kim, N.*

The International Journal of Advanced Manufacturing Technology, pp.1–24, 2024

Optimizing process parameters for hot forging of Ti-6242 alloy: A machine learning and FEM simulation approach

Kim, Y., Jeong, H.Y., Park, J., Kim, K., Kwon, H., Ju, G., and Kim, N.

Journal of Materials Research and Technology, 27, pp.8228–8243, 2023

Two-echelon collaborative routing problem with heterogeneous crowd-shippers

Kim, B., Jeong, H.Y.*, and Lee, S.

Computers & Operations Research, 160, p.106389, 2023

Adaptive supply chain system design for fruit crops under climate change

Jeong, H.Y., and Choi, C.*

Systems, 11(10), p.514, 2023

Drone routing problem with truck: Optimization and quantitative analysis

Jeong, H.Y., and Lee, S.*

Expert Systems with Applications, 227, p.120260, 2023

Cogging process design of M50 bearing steel for billet quality

Park, J., Kim, Y., Jeong, H.Y., Kwon, H., Kwon, Y., and Kim, N.*

Journal of Materials Research and Technology, 26, pp.5576–5593, 2023

Disruption propagation and repair response in interdependent systems: Network model and simulation approach

Jeong, H.Y.*, Kim, Y., Lee, S., Moreland, J., and Zhou, C.

Simulation Modelling Practice and Theory, 124, p.102730, 2023

Processing parameters optimization in hot forging of AISI 4340 steel using instability map and reinforcement learning

Jeong, H.Y., Park, J., Kim, Y., Shin, S.Y., and Kim, N.*

Journal of Materials Research and Technology, 23, pp.1995–2009, 2023

Optimal scheduling and quantitative analysis for multi-flying warehouse scheduling problem: Amazon airborne fulfillment center

Jeong, H.Y., Song, B.D.*, and Lee, S.

Transportation Research Part C: Emerging Technologies, 143, p.103831, 2022

The flying warehouse delivery system: A quantitative approach for the optimal operation policy of airborne fulfillment center

Jeong, H.Y., Song, B.D.*, and Lee, S.

IEEE Transactions on Intelligent Transportation Systems, 22(12), pp.7521–7530, 2020

The humanitarian flying warehouse

Jeong, H.Y., David, J.Y., Min, B.C., and Lee, S.*

Transportation Research Part E: Logistics and Transportation Review, 136, p.101901, 2020

Truck-drone hybrid delivery routing: Payload-energy dependency and No-Fly zones

Jeong, H.Y., Song, B.D.*, and Lee, S.

International Journal of Production Economics, 214, pp.220–233, 2019

Last-Mile Delivery Capacity Building in Pandemics Utilizing Community Resources

Kim, B., Jeong, H.Y., and Lee, S.

Available at SSRN 4168513

Drone Delivery Vehicle Routing Problem with Multi-Flight Level

Kim, Y., Jung, H., and Lee, S.

IFIP International Conference on Advances in Production Management Systems, August 2021. Cham: Springer International Publishing, pp. 43–51

Collaborative Hybrid Delivery System: Drone Routing Problem Assisted by Truck

Jeong, H.Y., and Lee, S.

Advances in Production Management Systems. Artificial Intelligence for Sustainable and Resilient Production Systems: IFIP WG 5.7 International Conference, APMS 2021, Nantes, France, September 5–9, 2021, Proceedings, Part III. Springer International Publishing, pp. 33–42

Optimizing Process Parameters for Hot Closed Forging of Ti-6242 Alloy: A Machine Learning and FEM Simulation Approach

Kim, Y., Jeong, H.Y., Park, J., Kim, K., Kwon, H., Ju, G., and Kim, N.

Available at SSRN 4588071

Movable Unmanned Aerial System: Optimization of System, Resource Design and Drone Routing

Song, B.D., Jun, S., Jung, H.Y., and Lee, S.

Procedia Manufacturing, 39, pp.300–306, 2019

Optimization of Vehicle-Carrier Routing: Mathematical Model and Comparison with Related Routing Models

Jeong, H.Y., and Lee, S.

Procedia Manufacturing, 39, pp.307–313, 2019

Airship-based drone delivery system: Quantitative approach for managerial and operational guidelines

Jeong, H.Y., and Lee, S.

INFORMS Annual Meeting, Seattle, US, 2019

Optimization of Vehicle-Carrier Routing Mathematical Model and Comparison with Related Routing Models

Jeong, H.Y., and Lee, S.

International Conference on Production Research 25th (ICPR25), Chicago, US, 2019

Movable Unmanned Aerial System Optimization of System Resource Design and Drone Routing

Song, B.D., Jun, S., Jeong, H.Y., and Lee, S.

International Conference on Production Research 25th (ICPR25), Chicago, US, 2019

Vehicle-Carrier Routing Problem

Jeong, H.Y., and Lee, S.

INFORMS Annual Meeting, Phoenix, US, 2018

Scheduling Hybrid Delivery System of Truck and Drone: Energy-Payload Dependency and No-Fly Zone

Jeong, H.Y., and Lee, S.

IISE Annual Meeting, Orlando, US, 2018

강화 학습 기반의 가공 지도를 이용한 단조 공정의 제어변수를 최적화하기 위한 장치 및 이를 위한 방법

Kim, N., and Jeong, H.Y.

Korean Patent No. 10-2023-0071207